सामग्री पर जाएँ
Il Sartoriale उत्कृष्ट पुरुष परिधान की दुनिया
★
Il Sartoriale
यहाँ से शुरू करें Bespoke दर्जी जूता-निर्माता शर्टमेकर्स कपड़ा निर्माता और व्यापारी कपड़े और सामग्री
दस्तकारी वस्त्र कैसे बनते हैं दर्जीगिरी की शैलियाँ दस्तकार इतिहास
वस्त्र परिधानसहायक वस्तुएँ ब्रांडव्यक्ति
स्थान शहरदेश विश्व मानचित्र
उपकरण दर्जी या जूता निर्माता खोजेंतुलनाएँ मूल्यशब्दावली जानेंसमाचार पुरालेख से पूछेंAI एजेंट ★ सहेजा गयानिःशुल्क API
के बारे में हमारे बारे मेंकार्यप्रणाली संपादकीय नीति स्रोत छवि लाइसेंसिंग हम कैसे आकलन करते हैं सुधारसंपर्क
सेटिंग्स
डार्क मोड
इंटरफ़ेस भाषा

निर्देशित दृश्य
इसमें नए हैं? हर पृष्ठ विवरण से पहले सामान्य भाषा में एक व्याख्या से खुलता है, और तकनीकी शब्द जहाँ आते हैं वहीं स्पष्ट किए जाते हैं।

विशेषज्ञ दृष्टिकोण
आप शब्दावली जानते हैं। सीधे विषय पर — परिचयात्मक व्याख्याएँ छिपी हुई हैं। यह डिफ़ॉल्ट है।

★ आपके सहेजे गए पृष्ठ
470 टेलरिंग, शूमेकिंग, कपड़े और शिल्प में प्रविष्टियाँ संदर्भ प्रकाशन: हम कुछ नहीं बेचते और किसी को भुगतान के आधार पर स्थान नहीं देते प्रत्येक आँकड़े के साथ उसका स्रोत और जाँच की तिथि दी गई है

सहायक वस्तु · Small Leather

Side adjusters

Side adjusters are small buckled or buttoned tabs at each hip that tighten trousers without a belt, keeping the waist smooth under a jacket.

Side adjusters are buckled or buttoned tabs at each hip that tighten the waistband. They hold a well-cut trouser without a belt, keeping the waistband smooth under a buttoned jacket. They are for fine adjustment, not for holding up a trouser that is too big.

A trouser side adjuster, close up
A trouser side adjuster, close up

What they can and cannot do

An adjuster takes up perhaps two or three centimetres either side. That is enough to accommodate a lunch, a season, or the difference between a shirt tucked and untucked. It is not enough to make a trouser two sizes too large fit, and using them that way produces gathers at the hip.

The most common form is the buckled tab; the button variant is older and cleaner. Both are usually attributed to the Daks trouser of the 1930s, which popularised self-supporting trousers.

The two forms

The buckled tab, a short strap through a small metal buckle, is the common version and adjusts steplessly. The button tab, with two or three positions, is older, flatter under a jacket and slightly less adjustable. Both are usually fitted at the hip, roughly over the front of the pocket. On a well-made trouser they are attached through the waistband rather than sewn to the surface, which is what stops them pulling loose.

Adding them

Whether adjusters can be retrofitted depends on the waistband construction: a properly built waistband with a curtain can usually take them, and a folded-and-stitched cheap one usually cannot.

For most people brace buttons are the easier and cheaper addition and do the job better. Adjusters are for someone who dislikes braces and wants the waist clean.

एक नज़र में

Function
Fine waist adjustment without a belt
Range
A few centimetres each side
Popularised by
Self-supporting trousers of the 1930s

यह कैसे बनता है

सभी तकनीकें →
  1. The inside of a bespoke trouser waistband Trouser waistband construction

    The least glamorous part of a suit, and the part that decides whether the trousers sit where you put them.

  2. A cutting room with pattern, basted jacket and ledger How a bespoke commission works

    A bespoke commission takes four to six months of measuring, a pattern made just for you, and repeated fittings, which are what you are paying for.

अंतिम समीक्षा: September 2026 इस पृष्ठ पर कोई त्रुटि रिपोर्ट करें
चित्र श्रेय 3
  1. A trouser side adjuster, close up: Original art · Il Sartoriale · Il Sartoriale · Il Sartoriale original art
  2. The inside of a bespoke trouser waistband: Original art · Il Sartoriale · Il Sartoriale · Il Sartoriale original art
  3. A cutting room with pattern, basted jacket and ledger: Original art · Il Sartoriale · Il Sartoriale · Il Sartoriale original art

छवि नीति