Aller au contenu
Il Sartoriale Le monde de la haute mode masculine
★
Il Sartoriale
Par ici Tailleurs sur mesure Bottiers Chemisiers Fabricants & marchands de tissu Tissus & matières
Métier Comment les vêtements sont fabriqués Styles de coupe Artisans Histoire
Vêtements VêtementsAccessoires MarquesPersonnes
Lieux VillesPays Carte du monde
Outils Trouver un tailleur ou un bottierComparaisons PrixGlossaire En savoir plusActualités Interroger les archivesAgents IA ★ EnregistréAPI gratuite
À propos À proposMéthodologie Politique éditoriale Sources Licences d'images Comment nous évaluons CorrectionsContact
Paramètres
Mode sombre
Langue de l'interface

Vue guidée
Nouveau ici ? Chaque page s'ouvre sur une explication en langage courant avant que le détail commence, et les termes techniques sont développés là où ils apparaissent.

Avis d'expert
Vous connaissez déjà le vocabulaire. Directement à l'essentiel, les explications introductives étant masquées. Il s'agit du mode par défaut.

★ Vos pages sauvegardées
470 entrées couvrant la taillerie, la cordonnerie, les étoffes et les métiers d'art Publication de référence : nous ne vendons rien et n'accordons aucun classement contre rémunération Chaque chiffre est accompagné de sa source et de la date à laquelle il a été vérifié

Accessoire · Care

Shoe care

Good shoes can last twenty years if you use shoe trees, rest them between wearings, apply cream and wax, and resole them before the sole wears through.

Leather fails by drying out and cracking at the flex points. The remedies are simple: shoe trees immediately after wearing, a day of rest between wearings, cream to feed the leather, wax to protect and shine the toe and heel, and resoling before the sole wears through to the welt.

Brushes, polish and cloth beside a shoe
Brushes, polish and cloth beside a shoe

The routine

  • Trees, every time. More important than polish.
  • Rest. A day between wearings lets the lining dry. Rotating three pairs makes each last more than three times as long.
  • Brush after each wearing with a horsehair brush to remove dust, which is abrasive.
  • Cream every ten to twenty wearings. Cream contains pigment and moisturisers and feeds the leather; it is what prevents cracking.
  • Wax on the toe and heel only, where you want shine and protection. Wax on the flex area cracks.
  • Resole when the sole is thin, not when it has holes. A hole lets water into the welt stitching and into the insole, which is a much larger repair.

Water

Wet shoes should be stuffed with newspaper or put on trees and dried slowly, away from any heat source. Heat dries the surface faster than the interior, the fibres shrink unevenly, and the leather cracks. A radiator will do more damage to a shoe in one evening than a year of rain.

Salt stains from winter pavements should be removed promptly with a diluted vinegar solution; salt draws moisture out of leather and leaves it brittle.

En un coup d'œil

Principal failure mode
Drying and cracking at the flex points
Most important habit
Trees immediately, and a day of rest
Cream
Feeds the leather; every 10–20 wearings
Wax
Toe and heel only
Never
Dry wet shoes near heat

Comment c'est fabriqué

Toutes les techniques →
  1. A welted shoe cut in cross-section Goodyear welting

    Goodyear welting is the durable machine-stitched construction used on good English and American shoes, letting a worn sole be replaced without touching the top.

Dernière révision: September 2026 Signaler une erreur sur cette page
Crédits photographiques 3
  1. Brushes, polish and cloth beside a shoe: Original art · Il Sartoriale · Il Sartoriale · Il Sartoriale original art
  2. Can of shoe polish-open - fs PNr°0289: Photograph · D-Kuru · Wikimedia Commons · CC BY-SA 3.0 at
  3. A welted shoe cut in cross-section: Original art · Il Sartoriale · Il Sartoriale · Il Sartoriale original art

Politique d'images