본문으로 건너뛰기
Il Sartoriale 파인 남성복의 세계
★
Il Sartoriale
시작하기 비스포크 테일러들 구두 장인 셔츠 메이커 직물 제조사 및 상인 원단 및 소재
장인 기술 옷이 만들어지는 방법 테일러링 스타일들 장인들 역사
의류 의복액세서리 브랜드인물
장소 도시국가 세계 지도
도구 테일러 또는 슈메이커 찾기비교 항목 가격용어집 더 알아보기뉴스 아카이브에 문의AI 에이전트 ★ 저장됨무료 API
소개 소개방법론 편집 방침 출처 이미지 라이선스 평가 기준 정오표문의
설정
다크 모드
인터페이스 언어

가이드 보기
처음이십니까? 모든 페이지는 세부 내용에 앞서 평이한 설명으로 시작하며, 전문 용어는 등장하는 곳마다 풀어서 설명합니다.

전문가 견해
이미 용어를 알고 계십니까. 입문 설명을 생략하고 바로 본론으로. 이것이 기본값입니다.

★ 저장된 페이지
470 테일러링, 슈메이킹, 원단, 공예에 걸친 항목 참고 자료 매체: 판매하는 것도, 대가를 받고 순위를 매기는 것도 없습니다 모든 수치에는 출처와 확인 날짜가 명시됩니다

장인 · Artisans

Charles Goodyear Jr.

Mechanised the welt in the 1870s and made a repairable shoe affordable.

Goodyear developed welt-stitching machinery from earlier designs in the 1870s. It allowed welted construction in which the sole is stitched to a welt rather than to the upper, and can therefore be replaced, to be produced in quantity. Northampton's modern industry and the entire market for good factory shoes rest on it.

What the machine did

Hand welting requires a maker to cut a holdfast from the insole and stitch through it with an awl, which is slow and skilled. Goodyear's machinery substituted a glued canvas rib and a stitching machine, producing a welt in minutes rather than hours.

The construction is slightly weaker (the glued rib can eventually fail where a carved holdfast cannot), and it is enormously cheaper. That trade-off created the category of the good affordable shoe.

The name

His father, Charles Goodyear senior, developed vulcanised rubber and is the Goodyear the tyre company is named after. Neither man had any connection to the tyre business, which was named in tribute after the elder Goodyear's death.

The shoe construction and the tyre company therefore share a name for the same underlying reason and no direct one.

What it meant for Northampton

Northampton had made shoes by hand for two centuries and was already the English centre. The welting machinery arrived at the point when the town was industrialising and let it produce, in quantity, the construction it had been making one pair at a time.

The town's surviving factories still use the same construction, and the clustering of makers, last makers and leather merchants that grew around it is why the trade has been so difficult to relocate.

Mechanising the welt, and what it made possible

Hand-welting is slow, and before the welt could be machine-stitched a repairable, water-resistant, properly-constructed shoe was necessarily expensive. The machine did not make a better shoe than a hand-welted one; it made a good enough one affordable, which had far larger consequences.

Almost every quality shoe discussed on this site descends from that machine, and the entire Northampton industry was built on it.

The name on the construction is the inventor's, not the tyre company's; the two Goodyear businesses are unrelated beyond the family name.

한눈에 보기

Developed
Welt-stitching machinery, 1870s
Enabled
Resoleable footwear in quantity
Trade-off
A glued canvas rib in place of a carved holdfast
국가
최종 검토: September 2026 이 페이지의 오류 신고